In this video i re assemble the diy cnc mill after the machining in the last video.
I had to shim the linear rails because the milling i did on the machine wasn’t flat enough.
After i shimmed the linear rails i realize i hadn’t taken into account the fact that i had taken material off the rail mounting point but not the ball screw mounting point.
I had to weld a small peace of steel to the side to allow the ball screw to sit higher than the mounting point for the top plate.
I then mounted everything back together and took some test cuts.
If you enjoy this kind of content don’t forget to subscribe for more.
If you are interested in machining and welding and engineering check out some of my other videos.
Stick welding project on the diy cnc machine upgrade. https://youtu.be/3qMV7p-T_Zc
Don’t build a diy cnc spindle until you watch this. https://youtu.be/_KRpMnNO93A
Don’t build a diy cnc mill until you watch this. https://youtu.be/OpOXp0lcPWk
Ginger Ninjaneering Home page. https://www.youtube.com/channel/UCAW8F8Ztb7UgIT0OjYaj_ZA
source
Comments are closed.