This time I’d like to share with you some of my progress on my DIY CNC Lathe project where I mount the lathe chuck on the spindle. I also do some first tests of the axis movement, spindle runout. I made fly some chips too! At this moment this machine needs still improvements to be usable but I should be able to do this. Hopefully you will enjoy the video.
Check out also some more detailed videos about wiring the electronics:
Setup of stepper motors ? https://youtu.be/4cWBt3LDDVA
VFD wiring ?https://youtu.be/spaIL4k16MM
CNC Breakout ?Board setup https://youtu.be/I_9LpHoEgvU
VFD MACH3 setup ? https://youtu.be/P6xxHj6qYSA
Part 1 [The Frame] : ? https://youtu.be/eZ79Wvqx-LM
Part 2 [The Spindle]: ? https://youtu.be/WsTtgETydw8
Part 3 [The Tool Post]: ? https://youtu.be/swFcsXjT5Uo
Part 4 [The X and Z Axis]: ? https://youtu.be/wBgvc1lc2dQ
Part 5 [The Control Box]: ? https://youtu.be/DHxK9wjozXc
Part 6 [The Lathe Chuck]: ?https://youtu.be/yAxgRaLfQjU
Subscribe and hit the like button if you like the video and want more!
If you have any questions – comment down below.
Thanks for watching!
00:00 Intro
00:22 Mounting belts on motors
01:39 Preparing the machine
02:33 Backlash tests
03:00 Preparing the spindle for the chuck
05:06 Chuck runout
05:18 Some overview shoots
06:15 First turning operation
07:08 Outro
Facebook Page ? https://www.facebook.com/GBWMCNC
YouTube Channel ??https://www.youtube.com/c/GBWMWeldingMachiningCNC
source
Comments are closed.