First part of DIY CNC machine, in this video I showed some photos of building this machine and one of first test milling PCB. Under microscope in PCB holes are not centered. It was my fault, after milling tracks i should home machine, I did not do that. In photos you can see the Z axis is different as in video, I remade this because it had too much loose. I used Arduino Uno and GRBL, I will write something more about this machine later on Istructables website. If you have any question obviously you can ask in comments below. In next parts I will add:
-laser 5,5W
-create own PCB for control machine
-some lights on frame and motor
source