Cnc lathe makes brass part, Turn, Thread 32tpi, Drill, Part all at 3000rpm
This threaded brass adapter is part of a water check valve. It will be silver soldered into the check valve […]
This small cnc lathe can't tap threads. I try the G84 tapping command to see what happens.
Two small cnc lathes, one will tap threads using its Widows CAD/CAM. The other runs DOS software and does not
More turning, less grooving saves time. Small cnc lathe, drill, tap, turn & groove, carbide inserts
ERROR: At 5.26 “just using 2” should be “just using one” Sorry, picked it up too late to fix. I
Speeding up a boring job in cnc mini lathe. Boring in X rather than Z using a subroutine
Cut the boring time for a recess by running a little subroutine to bore in the X direction instead of
Cnc lathe threading a Hose Barb for Classic Mini Minor A series Engines. Drilled, turned, & parted
3/4″ hex brass fitting for water hose on classic mini A series engines. 1/2″ hose barb and 5/8″ x 18
Small cnc lathe turning brass nipple 3/8×32 Model Engineer thread
Small cnc lathe turning scrap10mm hex bras into two 3/8″x32 ME thread nipples. A little history of these lathes Manufactured
Profiling with a carbide parting tool and a small cnc lathe
The first in what I hope will be a series of videos looking at cutting a profile with a parting
CNC lathe threading M12 & M10. Turning brass with carbide inserts, 5C collet & 3 jaw chuck
There is no doubt that a Browne and Sharp screw machine (or many others, see comments) can make these parts