Episode 15: DIY CNC build – Epoxy leveling for the X rails
In this episode we measure evenness of the bed frame in the as-built condition. Then prepare it to take an […]
Episode 9 (part 2): DIY CNC Cover plates
In this episode we finish off the lower cover plates and end cap. Mostly machining, with a bit of ‘3D
Episode 12: DIY CNC build – Gantry Ballscrews
In this episode we finish the second ballscrew on the gantry, machine the pulleys, and give the mechanism a test
Episode 3: DIY CNC Z axis assembly
Episode 3: final assembly of the CNC Z axis, lateral rail alignment, and ballscrew fitment Join the CNC build community
Episode 4: DIY CNC Y axis assembly (pt1)
This time we machine some adjustments on the Y axis plates, check the effect of installation on the Z axis
Episode 2: DIY CNC Z axis rails alignment
In this episode we align all 4 Z axis rails to be flat and parallel to each other in the
Episode 13: DIY CNC build – Bed Ballscrews
In this episode we get the ballscrews on the bed machined and installed. Join the community at: mycncuk.com ____________________________________________________________________ Banggood
Episode 1: DIY CNC Line boring my new spindle housing
Using the lathe to line bore the spindle housing block for my latest CNC machine (mk4) Join the CNC build
DIY CNC machine directors cut 2of3 – X, Y & Z axis
I have had lots of requests for the CAD for this machine, and had some requests to have narration to
Episode 6: DIY CNC Gantry assembly
In this episode we machine parts for the gantry and assemble the major components. Join the community at: mycncuk.com Music: