DIY CNC Plasma Table Build – Part 4 X-Axis
Work continues on the DIY CNC Plasma Table build. In part 4, the Y-Axis is complete so now it is […]
DIY CNC Plasma Table Build – Part 5 Z-Axis
The Z-Axis is completed on the DIY CNC Plasma Table Build. BOM and additional info is available on the Making
DIY CNC Plasma Table Build- Part 8 First Cuts, Dialing It In and More Updates
The DIY CNC Plasma Table is finally cutting some metal. First results are good but the feed rates need to
DIY CNC Router – Part 4 Finishing the Y-Axis
This is the fourth video in the DIY CNC Router series. In this video I finish mounting the linear rail
DIY CNC Plasma – Torch Height Controller Installation
Installing a Torch Height Controller in the CNC Plasma cutter. Will it fix all the problems? Links to all CNC
DIY CNC Router – Part 2 Linear Rails
This is the second video in my DIY CNC Router series. In this video I start installing the linear rails
DIY CNC Plasma – Does It Need a Torch Height Controller
Fine tuning the CNC Plasma cutter. Does it need a THC (Torch Height Controller) to fix all the problems? Links
CNC Router Part 6 – Finishing the Y Axis
The DIY CNC Router project is moving right along. In this video the Y-Axis is finished and LinuxCNC is setup
DIY CNC Plasma – New Floating Z Axis
In this video, a new floating Z axis is made from 3D printed parts. Thingiverse Item – https://www.thingiverse.com/thing:2516238 6mm Linear
DIY CNC Router – Part 1 Building the Frame
This is the first video in my DIY CNC Router series. In this video I start building the frame of