drez20001, Author at CNC MACHINE

DIY CNC – Raised Dog Food Bench – Quick Project

drez20001 / July 5, 2023

This was a quick project to design and make a raised dog food bench on the CNC. The whole project […]

drez20001 / April 29, 2023

This CNC build was based on plans from solsylva.com. I modified many of the parts and used an inexpensive 3D

drez20001 / April 27, 2023

I am constantly redesigning my CNC machines. For this change-up I removed the roller skate bearing z-box and cobbled together

drez20001 / April 10, 2023

This is just a short video showing how to design a gear in Inkscape, have MakerCam create the g-code, and

drez20001 / March 22, 2023

Carbide Create software is now free and unlocked for use on any CNC machine! It’s pretty awesome software. The folks

drez20001 / March 3, 2023

A homebuilt CNC machine using drawer slides and regular hardware store materials. The motors were ordered through eBay. source

drez20001 / January 21, 2023

I recently attached a wood burning tool to my CNC to create some cool designs. The results were very good

drez20001 / January 10, 2023

Holding work down on a CNC bed is always a challenge. Clamps get in the way and take up valuable

drez20001 / December 21, 2022

Creating wood inlays using Inkscape and Jscut.org is a blast. Any design that is drawn in a vector program (Inkscape,

drez20001 / November 4, 2022

During the holidays I stumbled onto some wood burning projects that were pretty cool. After some research and tinkering I