In this episode I weld on the side panels for the stand, mount the electrical enclosure to the side and build the carriage for the Z axis to which the spindle will later be mounted.
_____________________________________
DIY CNC Milling machine build.
My objective for this project is to design and build a CNC milling machine without the need for any machining of the parts. Ordinarily, building a mill requires a much bigger mill to get the axis surfaces flat and parallel.
By using aluminum tool plate (which is in theory pre-machined flat) and bolting the critical components rather than welding, it should be possible to avoid any machine work. After all, I’m building a mill because I don’t have one!
Linear rails and ball screws are the cheap Chinese 20mm style that you can find on eBay etc.
__________________________________
Music Credit
—————–
No Quarter – TechnoAXE
——————
Dark vs. Light – – TechnoAXE
source
Comments are closed.