Hey y’all! I know I clear my throat a lot in this one.. But was getting over a cold.
In this episode, we concentrate on the frame. Getting all the holes lined up, drilled and tapped. This process was pretty straight forward and went fairly quick with the drill/tap combo. I highly suggest drilling pilot holes prior. But you could always just go for it.
Next episode, we will dig into the Y axis! A lot of holes there and spoiler alert.. It all went off without a hitch.
Stay tuned as I will be documenting the entire PrintNC build! If you like the series, consider dropping a like and subscribing. It really helps me with motivation to keep making additional content.
Join the PrintNC Discord – https://discord.gg/YeWBsd4mqP
PrintNC Website – https://threedesign.store/
PrintNC Wiki: https://wiki.printnc.info/en/home
Fusion360 Model: https://a360.co/37fPVZ5
00:00 – Intro
01:43 – Voltage Intro
02:05 – X Frame Templates
03:51 – Time-lapse 1
07:47 – Templates 2
09:22 – Time-lapse 2
13:06 – Templates 3
17:06 – Time-lapse 3
21:41 – Tapping Finished
22:16 – Time-lapse 4
22:41 – Frame Square 1
23:21 – Time-lapse 5
25:19 – Frame Square 2
26:53 – Outro
source
Comments are closed.