Check out the plans for this project available on our website – https://www.toolstoday.com/sunflower-catch-all-tray-cnc-plans-downloadable-and-customizable.html
Dishing out a catch all tray on the Stepcraft M.1000 CNC machine using the Amana Tool item 45982 3/4″ diameter bowl bit, 46315-K 1/4″ upcut bit and Stepcraft Laser engraver all linked below. This bit left such a clean cut that I will have to do zero sanding on the inside of the tray before adding finish! The design was filled with Total Boat 2:1 epoxy and Mixol Canary Yellow Pigment.
– – – – – – –
RPM: 18,000
Feed Rate: 80ipm
Plunge Rate: 30ipm
Depth per pass: .15″
– – – – – – –
RPM: 18,000
Feed Rate: 100ipm
Plunge Rate: 50ipm
Depth per pass: .25″
#short #shorts
Tools Used:
Vectric Software for CNC https://www.toolstoday.com/everything-cnc/cnc-software.html
STEPCRAFT M.1000 36 x 48” CNC Machine https://www.toolstoday.com/stepcraft-m-1000-cnc-system.html
STEPCRAFT Laser Engraving Head DJ445 3 Watt
https://www.toolstoday.com/v-14776-20983.html
Amana Tool 45982 Carbide Tipped Bowl & Tray 1/4 R x 3/4 D x 5/8 CH x 1/4 Inch SHK Router Bit
https://www.toolstoday.com/v-5662-45982.html
Amana Tool 46315-K SC Spektra Extreme Tool Life Coated Spiral Plunge 1/4 Dia x 1 CH x 1/4 SHK 2-1/2 Inch Long Up-Cut Router Bit
https://www.toolstoday.com/v-13780-46315-k.html
** Subscribe – https://www.youtube.com/user/toolstoday
** Shop the website – http://www.toolstoday.com
source
Comments are closed.