10W 20W Fiber Metal Laser Marking Machine Equipment

10W 20W Fiber Metal Laser Marking Machine Equipment

Do you want to mark(engrave) on both metal and nometal material? Do you want fast speed marking? (7000mm/s)? Do you want high resolution (0.001mm)? Zing laser marking machine can meet all of the above requirements. Warmly welcome inquiry. 1. Beam quality excellent, used in precision, fine...

Send InquiryChat Now

Product Details

Do you want to mark(engrave) on both metal and nometal material? Do you want fast speed marking? (7000mm/s)? Do you want high resolution(0.001mm)? Zing laser marking machine can meet all of the above requirements. Warmly welcome inquiry.


The use features of laser marking equipment:

1. Beam quality excellent, used in precision, fine marking.

2. Small size, and carrying convenient, To adapt to the requirements of processing sites often transform, realize  the portable.

3. Laser power output stability, equipment high reliability.


Equipment composition and configuration introduction:

1. Fiber-optic laser marking machine mainly consists of four parts: IPG fiber laser light, road and galvanometer scanning system, computer control system and the workbench.

2. Excellent beam quality to ensure that optical fiber laser marking machine in a variety of material satisfying

marking effects, including: metal, ceramic, PCB, coating plastic and glass, etc.


Life of the optical fiber laser:

optical fiber laser marking machine use 915 nm laser diode as the sources are used to pump, the average working hours to 100000 hours.


Small and exquisite Volume , applicable in the bad environment:

Because fiber with very good soft around sex, laser design quite small flexible, compact structure, small volume. Optical fiber surface area/volume ratio is high, cooling effect is good, need not huge water cooling system, just simple air cooling can, can be in bad conditions, such as high impact, high vibration, high temperature, dirt under the conditions of the normal operation.


Free maintenance operation:

Optical fiber laser is no need for any maintenance (not including adjust or clean lens)


Technology parameter table of metal laser marking machine:

Technology index

Z30

Laser parameters

optical maser

WUHAN RAYCUS

Laser wavelength

1064nm

Average output power

30W

Whether or not to bring the light isolation

bring

Modulation frequency range

20kHz~80kHz

Galvanometer parameters

Maximum speed

7000mm/s

resolution

0.001mm

Repositioning precision

0.003mm

Optical output characteristics

Marking range

F = 160 mm, range 110 x 110 mm (with standard)

Minimum line width

0.01mm

inimum height of characters

0.2mm

Cooling system

Cooling way

Air cooling

System properties

Laser power supply

0.5KW/AC220V/50Hz

Manual working table stroke

Movements itinerary 285 mm (desktop type)

Environmental requirements

0 ~ 35 ° C, 90% or humidity

 

 

Samples of fiber laser marking machine:

samples_photo_of_laser _marking_ equipment

 

Inquiry