Small Wood Laser Cutter Carving Machine

Small Wood Laser Cutter Carving Machine

According to the high energy density and operability of laser, the Small Wood Laser Cutter Carving Machine has been successfully developed on the basis of many years of production of laser equipment. The equipment has a wide range of processing materials, smooth cutting edges, no burrs, no polishing, no noise, no dust, fast processing speed, high precision, less waste and high efficiency.

Send InquiryChat Now

Product Details

Technical Parameter:


Product model

Z6040

Z9060

Max working area(mm)

600x400

900x600

Laser power

60W/80W/100W/120W/150W/180W

Laser Types

Hermetic And Detached CO2 Laser Tube

Engraving speed(mm/min)

0-75,000

Cutting speed(mm/min)

0-40,000

Minimum letter

English 1 x 1mm

Location precision

≤0.01mm

Resetting positioning accuracy

0.01mm

Driving system

Stepper  

Software

Lasercut 5.3 or RDworks V8

360°slope engrave

Yes

Power supply

AC 220V(or 110V)/50~60HZ

Operating temperature

0 - 45℃

Operating humidity

5 - 95%

Laser output control

1-100% control panel and software setting

Highest scanning precision

50-1000DPI

Compatible software

CorelDraw, AutoCAD, Photoshop


Product Features:

As the complexity of the cutting engraving process is strengthened, the traditional manual processing and machining are restricted by equipment and technology, and the precision of the processed object is low, which affects the quality of the product to a certain extent, and even more affects the economic benefits.

According to the high energy density and operability of laser, the Small Wood Laser Cutter Carving Machine has been successfully developed on the basis of many years of production of laser equipment. The equipment has a wide range of processing materials, smooth cutting edges, no burrs, no polishing, no noise, no dust, fast processing speed, high precision, less waste and high efficiency. It is the best choice for all industries and replacement.


Precautions:

1. When using automatic focal length, be careful that the automatic measuring stick must be tightened, otherwise the work surface will be topped to the laser.

2. When the laser engraving machine is working, it is forbidden to open the cover.

3. Open the smoke exhaust and blow smoke equipment during processing.

4. Processing wood, paper, you must pay attention to the processing speed to avoid fire.

5. The initial user performs red light positioning when performing irregular processing.

Inquiry