Laser Cut Plywood Shapes

Laser Cut Plywood Shapes

Z4060 laser engraving cutting machine for wood pen small wood balsa wood and plywood shapes cutting engraving is one type of small wood laser cutting machine that can be applied in laser cut plywood shapes and laser cutting machine for balsa wood. It can be used as laser engraving machine for...

Send Inquiry

Product Details

      Z4060 laser engraving cutting machine for wood pen small wood balsa wood and plywood shapes cutting engraving is one type of small wood laser cutting machine that can be applied in laser cut plywood shapes and laser cutting machine for balsa wood. It can be used as laser engraving machine for pens engraving or wood pen laser engraving machine.  The working areas of Z4060 laser cutting machine is 400x600mm. It can be widely used in woodworking industry, art& gift industry, mould industry, seal industry and ect. The application materials cover wood, leather, plywood, plastic, paper, metal, MDF, glass, rubber, bamboo, cloth and ect. This portable laser cutting machine adopts Co2 sealed glass laser tube. You can choose the laser tube power ranging from 60w, 80w, 100w, 120w, 150w and 180w, but we usually recommends our customers to equip with 60w or 80w laser tube in order to get good cutting effect. Our customers can choose from two working table: Honeycomb working table or strip working table. The two types of working table are appropriate for different materials cutting or engraving. As one advance desktop laser engraving machine, Zing3050 is equipped with RDworks V8 control software that is compatible with Coreldraw& AutoCAD.


 


Package acrylic laser engraving machine:

合成页.jpg


Free provide:


产品配件.jpg


Technical Parameter laser cut acrylic machine:

Product model

Z6040

Z9060

Z1390

Max working area(mm)

600x400

900x600

1300x900

Laser power

60W/80W/100W/120W/150W/180W

Laser Types

Hermetic And Detached CO2 Laser Tube

Engraving speed(mm/min)

0-75,000

Cutting speed(mm/min)

0-40,000

Minimum letter

English 1 x 1mm

Location precision

0.01mm

Resetting positioning accuracy

0.01mm

Driving system

Stepper  

Software

Lasercut 5.3 or RDworks V8

360°slope engrave

Yes

Power supply

AC 220V(or 110V)/50~60HZ

Operating temperature

0 - 45℃

Operating humidity

5 - 95%

Laser output control

1-100% control panel and software setting

Highest scanning precision

50-1000DPI

Compatible software

CorelDraw, AutoCAD, Photoshop

Auxiliary Devices

Exhaust fan and Exhaust pipe

Cooling mode

Water-cooling and protection system

Operating system

Window 98/ME/2000/XP/VISTA/2007

Graphic format supported

BMP, CIF, JPEG, TGA, TIFF, PLT, AI, DXF, DST

(TIANDAO Embroidery Software), DWG, CDR, etc

Accessories

Water pump, air pump, exhaust fan, base, wheel etc

Product Features of laser acrylic cutter:

1. Do I need to record all the cut/carving parameters of different materials?

Needless to say, we added a parameter library to the software, once you found out which Settings were appropriate for a particular material.You can record it in the parameter library, and the next time you cut the same material, you can read it directly from the argument library.

2.Does your machine run on a laptop or a desktop?

Yes, as long as your computer operating system is Windows 2000 or XP or vista or win 7/8/10

3.Can your machine run on XP?

Our machine runs on Windows 2000 / XP/vista/win 7/8/10 32bits and 64bites system.But it does not support the Mac operating system (apple developed it).

4.What kind of software is used to design the project?

You can use both CorelDraw and AutoCAD to design all your artwork and then send it to RDWorks software to set the paramet

5.What format does the software support?

JPG, PNG, BMP, PLT, DST, DXF, CDR, AI, DSB, GIF, MNG, TIF, TGA,PCX, JP2, JPC, PGX, RAS, PNM, SKA, RAW

6.Will it engrave from a jpeg image?

Yes

7.Can I take a picture and engrave the image on an object without any hassles?

Yes, you can take a photo by using a camera and then load the photo to the software directly and engrave it.

8.Does machine comes ready to work?

the laser machine is ready to work, the exhaust fan and the air pump and the water pump are included. (But when you using a big power laser tube, it is suggested to buy a water chiller for cooling the laser tube)

9.How much time do I need to spend on learning how to run the laser machine?

As long as you know how to design jobs in graphic software, it just takes a few hours for you to become a master of laser machine. You just need to do some tests to know what speed and power is good for different materials. Since we’ve provided some of the parameter library, it will save you more time.You can watch the guiding videos from our website to learn how to use the machine in advance too.

10.Do I need separate laser systems for engraving and cutting?

No, our laser machine can do both cutting and engraving very well.You just need one machine for both kinds of jobs.

Samples of wood laser cutting machines:

Plywood.jpg



Applicable material for reference:

 Material

EngravingCuttingMaterial EngravingCutting

 Natural wood

 Paper

 Acrylic

 Mylar

 Glass

×

 Pressboard

 Double color plate

 Rubber

 Bamboo

 Plywood

 MDF

 Fiberglass

 Cloth

 Painted metal

 Leather

 Plastic

 Marble

×

 Ceramic

×

 Matte boards

 Coated Metal

×

 Stone

×

 Other materials


Cutting thickness of different laser power for reference:

 Laser power (W)

 Acrylic(mm)

 Plywood(mm)

 MDF(mm)

 40W

 3

 2  

 1.5

 60W

 8

 5

 3

 80W

 12

 8

 6

 100W

 15

 12

 9

 130W

 20

 15

 12

 150W

 25

 20

 15

Inquiry