Co2 Laser Engraver Cutter Machine

Co2 Laser Engraver Cutter Machine

Co2 Laser Engraver Cutter Machine is an engraving machine using co2 laser technology. This kind of laser equipment is a general-purpose model, with a rear focusing mode, small size and high integration.

Send InquiryChat Now

Product Details

Technical Parameter:

Product model

Z1390

Z1612

Max working area(mm)

1300x900

1600x1200

Laser power

60W/80W/100W/120W/150W/180W

Laser Types

Hermetic And Detached CO2 Laser Tube

Engraving speed(mm/min)

0-75,000

Cutting speed(mm/min)

0-40,000

Minimum letter

English 1 x 1mm

Location precision

≤0.01mm

Resetting positioning accuracy

0.01mm

Driving system

Stepper  

Software

Lasercut 5.3 or RDworks V8

360°slope engrave

Yes

Power supply

AC 220V(or 110V)/50~60HZ

Operating temperature

0 - 45℃

Operating humidity

5 - 95%

Laser output control

1-100% control panel and software setting

Highest scanning precision

50-1000DPI

Compatible software

CorelDraw, AutoCAD, Photoshop

Auxiliary Devices

Exhaust fan and Exhaust pipe

Cooling mode

Water-cooling and protection system

Operating system

Window 98/ME/2000/XP/VISTA/2007


Product Features:

Co2 Laser Engraver Cutter Machine is an engraving machine using co2 laser technology. This kind of laser equipment is a general-purpose model, with a rear focusing mode, small size and high integration.


The principle of laser engraving is that the laser beam is transmitted and focused on the surface of the material through the optical mechanism, and the material of the high energy density laser beam action point rapidly vaporizes to form pit points. Using a computer controlled xy console to drive the laser head to move and control the laser switch as required, the image information processed by the software has been stored in the computer in some way. When reading information from the computer in order, the laser head is along Scan tracks are scanned back and forth line by line from left to right and top to bottom. Whenever a "1" point is scanned, the laser is turned on and the laser is turned off when scanning to a "0" point. The computer stores the information in binary, which coincides with the two states of the laser switch.

Inquiry