Glass Cup Rotary Laser Engraving Machine

Glass Cup Rotary Laser Engraving Machine

Glass is easily broken during the engraving process, so glass engraving must be very careful. For different types of glass, the amount of lead is different, and the engraving method is not the same. As the lead content increases, the hardness and high temperature viscosity of the glass decrease, and the glass is more likely to be broken. Ordinary glass is usually easier to engrave than crystal glass because of its high lead content and reduced hardness and viscosity, which increases the difficulty of laser engraving.

Send InquiryChat Now

Product Details

Technical Parameter:


Product model

Z6040

Z9060

Max working area(mm)

600x400

900x600

Laser power

60W/80W/100W/120W/150W/180W

Laser Types

Hermetic And Detached CO2 Laser Tube

Engraving speed(mm/min)

0-75,000

Cutting speed(mm/min)

0-40,000

Minimum letter

English 1 x 1mm

Location precision

≤0.01mm

Resetting positioning accuracy

0.01mm

Driving system

Stepper  

Software

Lasercut 5.3 or RDworks V8

360°slope engrave

Yes

Power supply

AC 220V(or 110V)/50~60HZ

Operating temperature

0 - 45℃

Operating humidity

5 - 95%

Laser output control

1-100% control panel and software setting

Highest scanning precision

50-1000DPI

Compatible software

CorelDraw, AutoCAD, Photoshop

Auxiliary Devices

Exhaust fan and Exhaust pipe

Cooling mode

Water-cooling and protection system

Operating system

Window 98/ME/2000/XP/VISTA/2007


Product Features:

Glass is easily broken during the engraving process, so glass engraving must be very careful. For different types of glass, the amount of lead is different, and the engraving method is not the same. As the lead content increases, the hardness and high temperature viscosity of the glass decrease, and the glass is more likely to be broken. Ordinary glass is usually easier to engrave than crystal glass because of its high lead content and reduced hardness and viscosity, which increases the difficulty of laser engraving.

Engraving is a kind of drilling and milling combined processing from the principle of machining. The various data input modes of the engraving machine are more than necessary. The computer engraving machine has two types of laser engraving and mechanical engraving. Both of these types have high power and low power. Because the application range of engraving machine is very wide, it is necessary to understand the more suitable application range of various engraving machines. The low power is only suitable for two-color board, architectural model, small signage, three-dimensional handicraft, etc. Due to the small power, it greatly affects The scope of its application. High-power engraving machine can do things for small power engraving machine. It is more suitable for large-scale cutting, relief, and engraving.

Inquiry