60w 80w 100w 130w 150w Laser Cutter Engraver

60w 80w 100w 130w 150w Laser Cutter Engraver

Z90125 laser cutter engraver can be equipped with 60w, 80w,100w,130w and 150w laser tubes. Customers can choose their needed laser tube power according to the materials they cut. We usually suggest our customers have 80 laser tube and 100 w laser tube, because 60w laser cutter is little powerful...

Send Inquiry

Product Details

  Z90125 laser cutter engraver can be equipped with 60w, 80w,100w,130w and 150w laser tubes. Customers can choose their needed laser tube power according to the materials they cut. We usually suggest our customers have 80 laser tube and 100 w laser tube, because 60w laser cutter is little powerful than 80w laser cutter and 100w laser cutter. 80w laser cutter and 100w laser cutter are more appropriate for Z90125 laser cutter and engraver. 130w laser cutter and 150w laser cutter are recommended when customers need to more hard materials such as iron, stone and wood. All in all, it totally depends on our customers

4.jpg

详情1.jpg

详情2.jpg

Free provide:

产品配件.jpg


Technical Parameter laser cutting machine acrylic:

Product model

Z1390

Max working area(mm)

1300x900

Gross weight with accessories

320kgs

Laser power

60W/80W/100W/120W/150W/180W

Laser Types

Hermetic And Detached CO2 Laser Tube

Engraving speed(mm/min)

0-75,000

Cutting speed(mm/min)

0-40,000

Minimum letter

English 1 x 1mm

Location precision

0.01mm

Resetting positioning accuracy

0.01mm

Driving system

Stepper  

Software

Lasercut 5.3 or RDworks V8

360°slope engrave

Yes

Power supply

AC 220V(or 110V)/50~60HZ

Operating temperature

0 - 45

Operating humidity

5 - 95%

Laser output control

1-100% control panel and software setting

Highest scanning precision

50-1000DPI

Compatible software

CorelDraw, AutoCAD, Photoshop

Auxiliary Devices

Exhaust fan and Exhaust pipe

Cooling mode

Water-cooling and protection system

Operating system

Window 98/ME/2000/XP/VISTA/2007

Graphic format supported

BMP, CIF, JPEG, TGA, TIFF, PLT, AI, DXF, DST (TIANDAO Embroidery Software), DWG, CDR, etc

Accessories

Water pump, air pump, exhaust fan, base, wheel etc


Details Introduction acrylic laser engraver:


1. Do I need to record all the cut/carving parameters of different materials?

Needless to say, we added a parameter library to the software, once you found out which Settings were appropriate for a particular material.You can record it in the parameter library, and the next time you cut the same material, you can read it directly from the argument library.

2.Does your machine run on a laptop or a desktop?

Yes, as long as your computer operating system is Windows 2000 or XP or vista or win 7/8/10

3.Can your machine run on XP?

Our machine runs on Windows 2000 / XP/vista/win 7/8/10 32bits and 64bites system.But it does not support the Mac operating system (apple developed it).

4.What kind of software is used to design the project?

You can use both CorelDraw and AutoCAD to design all your artwork and then send it to RDWorks software to set the paramet

5.What format does the software support?

JPG, PNG, BMP, PLT, DST, DXF, CDR, AI, DSB, GIF, MNG, TIF, TGA,PCX, JP2, JPC, PGX, RAS, PNM, SKA, RAW

6.Will it engrave from a jpeg image?

Yes

7.Can I take a picture and engrave the image on an object without any hassles?

Yes, you can take a photo by using a camera and then load the photo to the software directly and engrave it.

8.Does machine comes ready to work?

the laser machine is ready to work, the exhaust fan and the air pump and the water pump are included. (But when you using a big power laser tube, it is suggested to buy a water chiller for cooling the laser tube)

9.How much time do I need to spend on learning how to run the laser machine?

As long as you know how to design jobs in graphic software, it just takes a few hours for you to become a master of laser machine. You just need to do some tests to know what speed and power is good for different materials. Since we’ve provided some of the parameter library, it will save you more time.You can watch the guiding videos from our website to learn how to use the machine in advance too.

10.Do I need separate laser systems for engraving and cutting?

No, our laser machine can do both cutting and engraving very well.You just need one machine for both kinds of jobs.


Samples :


样品图22.jpg


Applicable material for reference:

 Material                  Engraving                      Cutting                        Material                         Engraving                      Cutting

 Natural wood

 Paper

 Acrylic

 Mylar

 Glass

×

 Pressboard

 Double color plate

 Rubber

 Bamboo

 Plywood

 MDF

 Fiberglass

 Cloth

 Painted metal

 Leather

 Plastic

 Marble

×

 Ceramic

×

 Matte boards

 Coated Metal

×

 Stone

×

 Other materials


Cutting thickness of different laser power for reference:

 Laser power (W)

 Acrylic(mm)

 Plywood(mm)

 MDF(mm)

 40W

 3

 2  

 1.5

 60W

 8

 5

 3

 80W

 12

 8

 6

 100W

 15

 12

 9

 130W

 20

 15

 12

 150W

 25

 20

 15


包装.jpg

factory.jpg



Inquiry