Operation rules of Laser marking machine

- May 05, 2017 -

Laser marking machine is a permanent marker with laser beams on the surface of various substances. The effect of marking is through the evaporation of the surface material exposed to deep material, or through the light of the surface material of chemical physical changes in the "engraved" traces, or through the light of energy burned some substances, showing the required etching patterns, text. Applied to electronic components, integrated circuits (IC), electrical appliances, mobile communications, hardware products, tools accessories, precision instruments, glasses watches, jewelry, automotive accessories, plastic keys, building materials, PVC pipes, medical equipment and other industries.

One, check the waterway, the circuit is correct rear can power up. The boot sequence is:

1, connect the incoming power supply, turn on the key switch. At this time the machine ventilation and refrigeration system power, ammeter display value of 7A or so;

2, wait 5-10 seconds, press the outside Control Panel trigger button, ammeter display value of zero, 3-5 seconds after the Krypton lamp lit, ammeter display value 7 A. (Reference to Laser power operation manual);

3. Turn on the galvanometer power supply;

4, open the computer, the required marking documents;

5, adjust the laser power to the working current (10~18A), can start marking;

Second, after the marking end, in the above order in reverse shut down the components power:

1, the laser power supply operating current to the smallest (7A or so);

2, shut down the computer;

3. Power off Galvanometer

4, press the Stop button;

5, turn off key switch;

6, break into the line power supply.


Related Products